The "Pending Adjustments For Which Closing Point" window will only be shown, if all following 3 conditions are met:
1) farmerswife takes the _next_ Closing Point from the "current system date" (this always happens).
2) You select a day in Long From > View Port, and farmerswife can take the _next_ Closing Point from that "Selected" day.
3) The _next_ Closing Point from the _selected day_ must be different to the Closing Point from the _current_ system date.
Only then, if all 3 above conditions are met, then the "Pending Adjustments For Which Closing Point" pop-up window is shown, for you to select which Closing Point farmerswife should use.
Examples:
a) Current system date: 31. March 2016
Next Closing Point date: 31. March 2016
_NO_ day in Long From > View Port selected.
HAPPENS:
No "Pending Adjustments... SELECT Closing Point" window is shown, because:
1) = Yes
2) = No
b) Current system date: 23. March 2016
Next Closing Point date: 31. March 2016
28th of March is selected in Long From > View Port.
Next Closing Point date: 31. March 2016
HAPPENS:
No "Pending Adjustments... SELECT Closing Point" pop-up window is shown, because:
1) = Yes
2) = Yes
3) = No
c) Current system date: 23. March 2016
Next Closing Point date: 31. March 2016
1st of April is selected in Long From > View Port.
Next Closing Point date: 31. May 2016
HAPPENS: The "Pending Adjustments... SELECT Closing Point" window IS shown, because:
1) = Yes
2) = Yes
3) = Yes
